에이피아이

Dnye pen

Super Marker (Surface Tension Measurement Liquid, Dyne Ink)

Dnye pen

-Dyne Level
30,32,34,36,38,40,42,44,46,48,50,52,54,56

Standard Features

Can be used on
various
materials
and objects
Can choose
between
pen and ink.
Can choose the
level and
quantity you
want to
purchase.
Very clear cobalt
blue color
Eco-friendly dyne
solution that
does not contain
formaldehyde,
a carcinogen.

How to use Super Marker

Be sure to read the precautions before use

Apply the solution with the pen or ink over a test area of approximately 30mm without excessive force on the
surface of the product.
After about 4 seconds, read the solution behavior (by observing the center area of the applied solution).
- Maintains – The super marker value is equal to the measured surface energy.
- If there is shrinkage – The measured surface energy is lower than the super marker value.
- If it spreads – The measured surface energy is higher than the super marker value.
If there is partial organic contamination on the measurement surface, the ink in the contaminated area will
shrink or bind.
Do not repeat measurements at the same area.
Treated surfaces are affected by environmental conditions such as temperature.

iCVC

Item

입력전원 (Input Voltage)

입력주파수 (Input Frequency)

입력전류 (Input Current)

접지저항 (Ground Resistance)

사용가스 (Input Gas)

가스압력 (Gas Pressure)

가스유량 (Gas Flow Rate)

플라즈마 출력 (Plasma Output)

방전전압 (Discharge Voltage)

방전주파수 (Discharge Freq)

플라즈마 길이 (Plasma Length)

코팅 폭 (Coating Width)

플라즈마 동작 주변온도 (Operation Ambient Temp)

방전헤드 수량 (Discharge Head Q'ty)

방전헤드 길이 (Discharge Head Length)

제품 무게 (Net Weight)

포장 무게 (Gross Weight)

제품 크기 (Dimension)

이베퍼레이터(Evaporator)용량 (Capacity)

이베퍼레이터(Evaporator)유량 (Flow rate)

이베퍼레이터(Evaporator)무게 (Weight)

이베퍼레이터(Evaporator)크기 (Dimension)

Unit

VAC

Amp

Ohm

MPa

LPM

Watt

KVolt

KHz

Deg.C

set

Meter

WDH,mm

Litter

LPM

WDH,mm

Single

220±10%, Single Phase

50 / 60

Max 8 per a head

Lower than 10

AIR(CDA), CO2, N2, O2, Ar &etc

0.4~0.6

25~80

500 / 1000 / 1500

8~12

30~60

Max. 70

1~50

Max 8 per a head

250*320*400

200*200*800

Dual

220±10%, Single Phase

50 / 60

Max 8 per a head

Lower than 10

AIR(CDA), CO2, N2, O2, Ar &etc

0.4~0.6

25~80

500 / 1000 / 1500

8~12

30~60

Max. 70

1~50

Max 8 per a head

480*320*400

200*200*800

※ 멀티 헤드 제품 및 비규격 제품(50 watt ~ 1800watt) 제작 및 공급 가능

※ 비규격 플라즈마 노즐 제작 및 공급가능

※ 제품의 사양은 성능 개선과 품질 향상을 위해 예고 없이 변경될 수 있습니다.